Your Bürstner contract partner is your point of contact when it comes to whether a seat retrofit is possible in your case. The feasibility of this must be clarified with Bürstner.
If the necessary parts are available and can be installed subsequently, it must be checked whether the vehicle needs to be loaded. Depending on the extent of the vehicle's equipment, uprating may be necessary, as an increased number of seats increases the standard weight relevant for registration. This must not exceed the permissible laden weight of the vehicle. The conversion work on your motorhome may only be carried out at the Bürstner factory.
Obligation to register: If additional seats are installed for use while driving, they must be approved with a test report from the manufacturer by a recognised technical testing organisation. The retrofit must then be entered in the vehicle documents.
The following documents are required for this:
- Certificate of no objection from the manufacturer
- Test report
Weight of the seats: An average restraint system adds approx. 30kg of weight + per seat.
This website uses automatic translations. Please excuse any errors. In case of doubt, the original German version applies.