If there is no water supply in your vehicle, you can check the following steps.
Buzzing of the fresh water pump:
- If you hear the fresh water pump buzzing when you turn on a tap, this is a good sign. But before you continue, check the water level in the fresh water tank.
Check the power supply:
- Make sure that the control panel for the power supply above the entrance door is switched on.
Have you already checked the fuse on the electrical block (EBL)? This is often labelled ‘Pump’.
Test other taps:
- Can you not hear the buzzing of the water pump even when operating the other taps?
The water pump is not working.
If you have ruled out all of the above points and the water pump still does not work, we recommend that you contact a Bürstner dealer.
Tip:
If there is too little or no water, there is a risk that the water pump will run hot during use and thus lose its function. In this case, the water pump must be replaced.